Coupe de Grace | Archie Concon’s Mitsubishi Mirage Killer 2-Door

 

Finish him! It was the video game sound bite that reverberated throughout the world signaling the complete and utter destruction of one’s opponent in the legendary Mortal Kombat video game franchise. If you were on the receiving end, it literally signalled the end of the line for you. Do not pass Go. Do not collect $200. The End.

 

DSPORT Issue #272
Text by APEworks // Photos by Mark Gerolaguin

 

 

When Las Vegas resident and enthusiast Archie Concon bought his 2000 Mitsubishi Mirage in the middle of the aughts, he was happy to have a two-door sports coupe but lamented the lack of power. “The car was super slow,” Concon explained. “I chose (it) because I couldn’t afford an Eclipse or an EVO or the insurance for either of those at the time.” Still, he had his sights set high and wanted to have a one-of-one build that could kick ass and take names as the Best of Show one day and run a 10-second quarter-mile the next, meaning “game over” for all other competitors.

Against the Grain

With street-driven race car aspirations, the venerable Mitsubishi 4G63 powerplant and an all-wheel-drive conversion was the obvious tried-and-true path to success. While there are documented Mirage to EVO conversions, 4G63 engine swaps, AWD conversions and the like, Concon wanted to up the ante by adding all those as well as a bit of unobtanium, a Varis ASSO widebody kit built for the EVO V/VI CP9A platform. While Concon won’t diverge the secrets or methods to the madness, he does admit that he took “conversion” to the next level. “There are plenty of others that have done the same conversions on a 4-door chassis, but none that I know of in this 2-door coupe,” he states. “It’s safe to say that the only Mirage parts left are the windshield, interior carpeting and the original two doors.”

The “Go” Show

Power production is handled by a stroked-out 2.1-liter 4G63 engine. The Manley Performance rotating assembly consists of a 94mm crankshaft pushing the Turbo Tuff connecting rods, topped off by a set of Manley Performance 10.0-to-1 compression ratio slugs. ACL race bearings provide the friction surfaces in the assemblage. Up top, a Headgames Motorworks CNC-machined race cylinder head contains a set of GSC Power-Division S3 camshafts with complementary GSC Power-Division valvetrain accessories. An HKS metal head gasket seals the space between the block and the head with ARP Custom Age 625+ studs providing the clamping services throughout.

A Xona Rotor 9569s turbocharger replaces and upsizes the factory unit. Featuring a 68mm compressor inducer with a 69mm turbine, the turbocharger pushes compressed air through the 4-inch ETS front-mounted intercooler and into the CNC Innovations billet intake manifold, metered through an 82mm Bosch Electric electronic throttle body. On the hot side atop the custom exhaust manifold, the spent gases vent out of the hood through the TurboSmart 45mm wastegate and directly out of the vented hood through custom titanium piping. A Tial 50mm blow-off valve provides additional overboost protection.

 

A massive turbocharger requires an equally massive amount of fuel and powerful spark to maximize power output. An Aeromotive Eliminator brushless fuel pump pushes the pump-grade E85 fuel to a quartet of Injector Dynamics 2,600 cc/min injectors on the fuel side. On the spark side, a Nissan R35 GT-R coil-on-pack system, known for its hardiness under extreme boost conditions, adapts to the 4G63 and provides the juice to the NGK spark plugs. A Fuel Tech FT600 engine management system controls fuel and spark actualization and synchronization. Overall, a 3-port electronic boost controller precisely and accurately controls the boost to within the 42-psi peak specification and allows the Mirage to output 742-wheel horsepower and 603 lb-ft of torque as measured on the MillerSpec Motorsports hub dynamometer. This power output through the converted all-wheel drive transmission earned Concon a 10.45-second timeslip at 145 mph at Las Vegas Motor Speedway at the August 2016 Drag Racing Nation event.

 

 

The “Show” Pro

With the performance half of his goal handled, we turn our attention to the eye candy. While the Mirage-to-CP9A conversions aren’t unheard of, the coupling of this conversion with the clean and functional installation of a Varis ASSO widebody kit for the EVO 5/6 platform makes this Mirage conversion stand alone. Various custom carbon fiber additions like the canards accent the Varis widebody. A CP9A EVO donated head and taillights for the complete visual crossover, while a Varis carbon fiber hood for a CP9A chassis covers the powerplant upfront and a matching lid tops the boot. A 1,700 mm Voltex carbon fiber wing provides the downforce required to stabilize the Mirage down the 1320. Concon had all non-carbon fiber parts painted in a custom Matrix Edge FX candy hue.

 

The interior is a show-quality, race-ready conglomeration of parts. A pair of Recaro Tommi Mäkinen Edition seats provide the only seating areas in the vehicle, while a pair of Takata camlock harnesses provide passenger retention. An ultra-rare OMP Tommi Mäkinen Edition wheel provides the steering input device while a host of FuelTech and Zeitronix gauges provide requisite information at a glance.

 

Business Handled

After retiring a number of transmissions trying to get the power to the ground, Concon has now employed a PPG dogbox transmission to reliably traverse street and strip. A ShepTrans transfer case and TRE rear differential ensure all four wheels move in time and under the highest stresses. Forward direction is transferred to a set of 18- x 10.5-inch Volk CE28N wheels wrapped in a set of BF Goodrich Phenom rubber in the 275/35-18 variety. Alcon 6-pot front and 4-pot rear calipers squeeze Alcon pads to scrub speed. Ohlins Street and Strip Dual Flow Valve coilovers hold up the chassis’ corners while a custom 4-point roll cage and HKS strut tower bars stiffen the fifth spring.

Fatality

Concon’s project has the ever-lengthening list of accolades, trophies and timeslips to justify the time and money spent. Concon states, “There is really nothing much left to do on the car except drive it. Maybe a carbon fiber driveshaft; I always say that will be my last mod.” He adds, “In this hobby, there’s really no such thing as a last mod. So build the car that pleases you, not the people around you; after all, it’s your money, spend it how you want.” So if you’ve never seen one before, this is what’s considered a “flawless victory.”

 

Gallery and Spec Sheet