SPEC SHEET
VEHICLE | |
---|---|
Year / Make / Model: | 1994 Mazda RX-7 |
Chassis Code: | FD3S |
Vehicle Weight: | 2,918 lbs. |
Weight Bias (F/R): | 50/50 |
Launch RPM: | 6,500 RPM |
Shift RPM: | 8,500 RPM |
Redline RPM: | 9,000 RPM |
Peak Boost: | 28 psi |
Fuel: | E85 |
ENGINE | |
---|---|
Engine Code: | 13B-REW |
Displacement (cc): | 1,308cc |
Peak Horsepower (@ RPM): | 525 whp (est.) |
Dyno Type: | Dyno Dynamics |
Engine Builder: | Speed Tek, NY |
Block Modifications: | Speed Tek Large Street Port |
Machine Work: | Speed Tek, NY |
Compression Ratio: | 9.4:1 |
Intake Manifold / Throttle Body: | Xcessive Mfg. Lower Intake Manifold |
Fuel Injectors: | Injector Dynamics ID1,000 (x4) |
Fuel Delivery System: | Bosch 044 Motorsport Pumps (x2) |
Engine Management System: | A’PEXi Power FC |
Engine Management Tuner: | Anthony Maharaj |
Boost Controller: | Turbosmart Eboost2 |
Spark Plugs: | NGK BUR9EQP |
Ignition System: | HKS Twin Power DLI |
Spark Plugs: | NGK BUR9EQP |
Exhaust Manifold: | Speed Tek Custom Built |
Exhaust System / Downpipe: | Speed Tek Custom 3-inch Stainless Steel Downpipe, |
3-inch Aluminum Cat Back w/Turn Down Tip | |
Wastegate: | Turbosmart Hypergate(x2) |
Blow-Off Valve: | Turbosmart RacePort (x2) |
Intercooler: | GReddy LS Intercooler |
Cooling System: | KOYO Radiator |
Oil System: | Custom Twin Oil Cooler |
Etc.: | Rywire Chassis Harness |
TURBOCHARGER | |
---|---|
Turbocharger: | Garrett GT3582 |
Frame: | T4 |
Compressor Wheel Specs: | 82mm Major, 61.4mm Inducer |
Turbine Wheel Speds: | 68mm |
Turbine Housing: | 1.06 A/R |
CHASSIS/DRIVELINE | |
---|---|
Springs, F&R (Make & Rate): | AirREX Air Suspension System |
Clutch / Flywheel: | ACT 6 Puck Sprung Hub w/ HD Pressure Plate |
Wheels (Make, Size & Offset): | WORK Wheels Emotion CR2P |
19×9.5-inch+10 (F) and 19×11-inch+44 (R) | |
Tires (Make & Size): | Nitto INVO 255/35R19 (F) and 305/30R19 (R) |
Brake Calipers (F&R): | Brembo GT Big Brake Kit (F) |
Brake Rotors (Diameter, F&R): | Brembo Disk (F), Power Slot Disk (R) |
Brake Pads (Front & Rear): | Brembo Pads |
Brake Lines: | Brembo Stainless-steel Braided |
INTERIOR | |
---|---|
Seats: | BRIDE VIOS III (driver) and Stradia II (passenger) |
Harnesses: | Sabelt 6-point Harnesses |
Steering Wheel / Quick Release: | Sabelt Suede Wrapped Steering Wheel |
Gauges: | STACK PRO Boost, Air/Fuel, Oil Temp, Oil Pressure |
EXTERIOR | |
---|---|
Aero Kit and Diffuser: | TRA Kyoto Rocket Bunny |
Hood: | RE Amemiya Hood |
Headlights, Taillights: | EVO R |
Mirrors: | EVO R Fender Mounted |
Paint: | Vintage Red |
Custom Body Work: | WD Ultimate Custom |