When Magnus Ohlaker (head machinist and engine assembler at Club DSPORT’s Engine Development Facility) was asked “what is your favorite aftermarket engine?”, we never expected Magnus to say the Subaru EJ257. Later, we learned it was because Magnus had assembled over 400 of these engines while working at Cosworth Engineering. […]
Read More
Engine Tech 201: Bottom End | Pistons, Rods, Cranks, Bearings and Sleeves
It’s been said that “You have to start from the bottom, if you want to get to the top.” The same can be said about building a top-performing engine. One needs to start building up the bottom end if they wish to realize top-level performance. Whereas turbochargers, superchargers, camshafts and […]
Read More
How To: Five Ways to Build a Bulletproof Engine Block
What is bulletproofing? In terms of high-performance engines, bulletproofing refers to increasing the power handling capacity of an engine beyond the desired power level. Depending on the design of the engine and the magnitude of the power handling increase desired, the bulletproofing process will vary. The parts and processes needed […]
Read More
Rotating Assembly 101: Rods, Pistons, and Crank
Imagine accelerating from a dead stop up to a average velocity approaching 5,000 feet-per- minute and back down to a dead stop 125 times every second. Now, imagine doing this in an environment seeing combustion gasses in excess of 1,400 degrees Fahrenheit. Sounds like Hell and that’s exactly what each […]
Read More